The motor axle doesn't fit in my bikes forks

It's very important for the Swytch motor wheel to fit snug inside the bike forks - therefore we make our wheels to a standard 10mm flat this is because most bike forks are usually 10mm wide or less. 

If your fork slots are less than 10mm, thats not a problem, the best thing to do is bit by bit, file down the flats on the Swytch motor axle.

If you need any fitting support please contact support@swytchbike.com with an image of your front fork and with the spec of your bike so we can further assist you. 

 

 

Was this article helpful?
2 out of 8 found this helpful