My motor wheel isn't spinning freely

  1. Check that the motor wheel is mounted in the correct direction
  2. Then, check that the brakes are properly adjusted and are not touching the rim.
  3. Next, check if the motor casing is touching the forks. If it is, you need to increase the gap between the forks to fix this. The best way is to add a washer to the axle as shown below - can you see the gap at the bottom? 

mceclip1.pngImage result for pedal washer

4.  Alternatively, move the torque washer to the inside of the forks and use in place of a new washer.


Was this article helpful?
9 out of 78 found this helpful